[
  {
    "slug": "crimped-stress",
    "label": "Phân bố ứng suất",
    "enLabel": "Stress distribution",
    "journal": "Composite Structures",
    "series": "272 · 114254",
    "year": 2021,
    "title": "Investigating stress distribution of crimped SMA fibers during pullout behavior using experimental testing and a finite element model",
    "authors": [
      "Ha Vinh Ho",
      "Eunsoo Choi",
      "Sang Ju Park"
    ],
    "doi": "10.1016/j.compstruct.2021.114254",
    "viQ": "Ứng suất lớn nhất trong sợi SMA dạng sóng và vữa nằm ở đâu khi kéo tuột?",
    "enQ": "Where do peak stresses occur in the crimped fiber and in the surrounding mortar?",
    "vi": "Trong mô hình phần tử hữu hạn, ứng suất lớn nhất trong sợi tập trung ở phía lõm của nếp uốn. Trong vữa bao quanh sợi, ứng suất cực đại xuất hiện ở phía lồi của nếp uốn.",
    "en": "The finite element analysis located the highest fiber stresses on the inside of the crimp and the highest mortar stresses on its convex side. The stress field therefore depends on which material is examined.",
    "method": "Thí nghiệm kéo tuột và mô hình phần tử hữu hạn trong Abaqus. Phân bố ứng suất cục bộ là kết quả tính toán.",
    "scope": "Khi so sánh hai mô hình, cần chỉ rõ vật liệu, mặt cắt và phần sợi chôn hay tự do. Đường lực–độ trượt đo được mô tả ứng xử tổng thể, còn vị trí tập trung ứng suất nêu trên do mô hình xác định.",
    "enscope": "The study combined pullout tests with finite element analysis. The local stress locations are model results. When comparing stress distributions, distinguish fiber from mortar and embedded from free segments.",
    "evidence": "Tóm tắt và phần phân tích ứng suất trong sợi và vữa.",
    "key": "HoChoiPark2021",
    "vol": "272",
    "pages": "114254"
  },
  {
    "slug": "embedment",
    "label": "Chiều dài chôn",
    "enLabel": "Embedment length",
    "journal": "Reviews on Advanced Materials Science",
    "series": "60(1) · 862–883",
    "year": 2021,
    "title": "Analytical bond behavior of cold drawn SMA crimped fibers considering embedded length and fiber wave depth",
    "authors": [
      "Ha Vinh Ho",
      "Eunsoo Choi",
      "Jun Won Kang"
    ],
    "doi": "10.1515/rams-2021-0066",
    "viQ": "Chiều dài chôn ảnh hưởng thế nào đến các đỉnh ứng suất sau đỉnh đầu khi kéo tuột sợi NiTi dạng sóng?",
    "enQ": "How does embedment length affect successive stress peaks during pullout?",
    "vi": "Trong các trường hợp phân tích, phần chôn dài hơn làm mức suy giảm giữa các đỉnh ứng suất liên tiếp nhỏ hơn. Vì vậy sợi còn duy trì được khả năng kháng kéo tuột ở độ trượt lớn hơn.",
    "en": "For the modeled crimped NiTi fibers, successive peaks in the pullout stress–slip curve fell more slowly with longer embedment. This helped sustain resistance as slip increased.",
    "method": "Phân tích các đường ứng suất kéo tuột–độ trượt cho sợi NiTi kéo nguội với độ sâu sóng và chiều dài chôn thay đổi.",
    "scope": "Hình 23 so sánh các trường hợp có từ 3 đến 10 sóng. Hình 24 tổng hợp các đỉnh và bỏ đỉnh cuối rất nhỏ. Khi đọc đường cong, lưu ý trục tung là ứng suất kéo tuột.",
    "enscope": "Figure 23 compares analytical cases with 3 to 10 waves. Figure 24 summarizes peak stresses and omits the very small last peak. Preserve the stress units when comparing these results with experimental load–slip curves.",
    "evidence": "Hình 23 và Hình 24 cùng phần văn bản diễn giải các đỉnh.",
    "key": "HoChoiKang2021",
    "vol": "60",
    "issue": "1",
    "pages": "862--883"
  },
  {
    "slug": "inclination",
    "label": "Góc đặt sợi",
    "enLabel": "Inclination and fracture",
    "journal": "Arabian Journal for Science and Engineering",
    "series": "50(3) · 1439–1456",
    "year": 2025,
    "title": "Investigating Pullout Behavior of Inclined Superelastic SMA Fiber in a Mortar Matrix Based on Finite Element Method",
    "authors": [
      "Vinh-Ha Ho",
      "Eunsoo Choi",
      "Van-Minh Ngo",
      "Ngoc-Long Nguyen"
    ],
    "doi": "10.1007/s13369-024-09002-9",
    "viQ": "Mô hình sợi SMA siêu đàn hồi đặt nghiêng trong vữa dự đoán chuyển từ tuột sang đứt trong điều kiện nào?",
    "enQ": "Under what modeled conditions does an inclined superelastic SMA fiber fracture instead of pulling out?",
    "vi": "Trong mô hình xét sợi SMA siêu đàn hồi đường kính 0,5 và 1,0 mm, sợi có thể kéo tuột tới góc nghiêng 9°. Khi vượt ngưỡng này, mô hình dự báo sợi đứt.",
    "en": "For the studied 0.5 mm and 1.0 mm superelastic SMA fibers, the finite element analysis predicted pullout up to an inclination of 9° and fracture beyond that angle.",
    "method": "Mô hình phần tử hữu hạn xét tính siêu đàn hồi của sợi, ứng xử dẻo của nền, co ngót và tham số tiếp xúc.",
    "scope": "Giá trị 9° gắn với vật liệu, kích thước và giả thiết trong mô hình của bài báo. Khi thay đổi điều kiện vật liệu hoặc neo sợi, cần kiểm tra lại cơ chế và ngưỡng chuyển tiếp.",
    "enscope": "The 9° transition is specific to the fibers, matrix and model parameters in this paper. The article appeared online on 16 April 2024 and was assigned to the 2025 journal volume.",
    "evidence": "Tóm tắt của nhà xuất bản, đoạn nêu đường kính, góc nghiêng và cơ chế phá hoại.",
    "key": "HoChoiNgoNguyen2025",
    "vol": "50",
    "issue": "3",
    "pages": "1439--1456"
  }
]